Inquiry of the product
Electronic parts department
TEL81-3-6362-8851 |
|
Pulse Perm Sensor
PPS-11
Pulse Perm Sensor sample(s) can be ordered here
Sample Price (Japanese yen) |
1p/lot
|
500p/lot
|
1000p/lot
|
Ask us |
Ask us |
Ask us |
|
|
 |



The principle of Pulse Perm Sensor has applied the large Barkhausen effect. The phenomenon which the field in the compound magnetic wire which carried out non-conventional machining reverses rapidly by an external magnetic field is used. The field reversed rapidly is changed and outputted to pulse form voltage inside a compound magnetic wire with the coil prepared in the wire perimeter. Therefore, a power source is not needed for sensor actuation. The impulse wave outputted is about 20 microseconds in pulse width in more than voltage 2V.
* The detail about Pulse Perm Sensor should look at here. |
Description
Output occurs with a non-power source
The output of the same magnitude is acquired regardless of the inversion rate of an external magnetic field
For a simple configuration, it is strong to temperature-and-relative-humidity change, and we secure dependability over a long period of time
The lineup of the model from which die length differs according to an application is carried out
|
Article |
Value of standard |
Output voltage |
More than ±2.0V |
Pulse width |
20us (at 2V, typical) |
Shortest action interval |
1kHz |
Longest action interval |
Indefinitely |
Direct current resistance |
100ohm-200ohm |
Par magnet: NEOMAX-44H 9(Magnetizing direction)*5*2.5 |
Reference position of magnet and sensor |
- Since change arises in output when the magnetic field which is not a par magnet is added to a sensor, be careful of the service condition of Pulse Perm Sensor .
- Please do not arrange a magnetic substance near Pulse Perm Sensor .
- This specification and shape may be changed without an advance notice.

|